N920CXXU3CQG1 Galaxy Note 5 SM-N920C Android 7.0 Nougat Firmware

Here goes Galaxy Note 5 SM-N920C official Android 7.0 Nougat update firmware version N920CXXU3CQG1. This stock firmware includes the July  1, 2017 Android Security patches. This build is the 5th Nougat update officially released in Middle East, Africa, and select countries in Europe.

Device nameGalaxy Note5
Model numberSM-N920C
Android version7.0 (Nougat)
Baseband versionN920CXXU3CQG1
Kernel version3.10.61-11762721
Build numberNRD90M.N920CXXU3CQG1
Android security patch levelJuly 1, 2017
Build dateTue 11 July 2017
APN920CXXU3CQG1
CPN920CXXU3CQG1
CSCN920COJV3CQG1 (Middle east, Africa)
N920COXE3CQG1 (Europe)



Tips: You may always use the most latest firmware update as it includes but not limited to new or enhanced features, device security enhancements. It may also includes some improvements to data connectivity, audio, screen display quality, camera, and other system enhancements.

Check The Most Latest Firmware version Here: Galaxy Note 5 SM-N920C Stock Firmware
This Stock firmware can only be use to restore the Galaxy Note 5 SM-N920C to its original Android operating system if it has been modified in unauthorized way and it will no longer receives an OTA updates.

Android 7.0 Nougat  Firmware Build N920CXXU3CQG1


The stock firmware is only compatible to the international or unlock version of Samsung Galaxy Note5 SM-N920C.
CountriesStock Firmware Build
United Arab EmiratesXSG-N920CXXU3CQG1 - (link)
Saudi ArabiaKSA-N920CXXU3CQG1 - (link)
Russian FederationSER-N920CXXU3CQG1 - (link)
Ukraine SEK-N920CXXU3CQG1 - (link)
South AfricaXFE-N920CXXU3CQG1 - (link)
EgyptEGY-N920CXXU3CQG1 - (link)

How to Use the Stock Firmware?


Stock firmware can only be use to restore the Galaxy Note5 to its original Android operating system images if it has been modified in unauthorized way and if and when the device no longer receives an OTA updates.
  1.  Backup all important data stored in the device memory, including contacts, messages, photos, videos, music, and other files.
  2. Recharge the phone or it’s still have at-least around 50% remaining power.
  3. Grab these tools:
    – Odin3_v3.12.3
    – USB driver or grab Smart Switch
  4.  Unzip the firmware package in your PC.
  5.  Open or run Odin3 in your computer.
  6.  Reboot the Galaxy Note 5 in Download mode. Turn Off the phone then press and hold down the Volume Down+Power+Home keys at the same time. You may then press the Volume Up key to continue.
  7. Connect the phone to PC.
  8.  Load the stock firmware:
    a. Single tarball – Click on AP button and load the stock firmware tarball.
    b. Multiple tarball – Load each individual stock firmware tarball such as BootloaderAPCP, and CSC on Odin3’s designated slots.
  9. Click the “Start” button to begin the installation.
  10. Wait until the flashing completely finishes and the phone reboot itself.
    You may also do perform a full factory data reset to regain a cleaner and fresher firmware installation. Just ensure that you already made a backup all of your important data stored in the phone.



Edit