Device | GALAXY Note 5 |
Model number | SM-N920C |
Android version | 7.0 (Nougat) |
Android security patch level | 1 February 2018 |
Baseband version | N920CXXS4CRB2 |
Kernel version | 3.10.61-11762721 |
Build number | NRD90M.N920CXXS4CRB2 |
Build date | 2018-02-07 |
Countries | Stock Firmware |
Cambodia | [Link] |
Thailand | [Link] |
Vietnam | [Link] |
Check The Most Latest Firmware version Here: Galaxy Note 5 SM-N920C Stock Firmware
How to Use the Stock Firmware?
The stock firmware is only compatible to the international or unlock version of Samsung Galaxy Note5 SM-N920C. This Stock firmware can only be use to restore the Galaxy Note 5 SM-N920C to its original Android operating system if it has been modified in unauthorized way and it will no longer receives an OTA updates.
FOLLOW THIS GUIDE: Install Galaxy Note 5 Factory Stock Firmware
1. Backup all important data stored in the device memory, including contacts, messages, photos, videos, music, and other files.
2. Recharge the phone or it’s still have at-least around 50% remaining power.
3. Grab these tools:
– Odin3_v3.12.3
– USB driver or grab Smart Switch
4. Unzip the firmware package in your PC.
5. Open or run Odin3 in your computer.
6. Reboot the Galaxy Note 5 in Download-Mode. Turn Off the phone then press and hold down the Volume Down+Power+Home keys at the same time. You may then press the Volume Up key to continue.
7. Connect the phone to PC.
8. Load the stock firmware:
a. Single tarball – Click on AP button and load the stock firmware tarball.
b. Multiple tarball – Load each individual stock firmware tarball such as Bootloader, AP, CP, and CSC on Odin3’s designated slots.
9. Click the “Start” button to begin the installation.
10. Wait until the flashing completely finishes and the phone reboot itself.
You may also do perform a full factory data reset to regain a cleaner and fresher firmware installation. Just ensure that you already made a backup all of your important data stored in the phone.